User Manual

Introduction
Congratulations on your purchase of the Triplett SBR2M Security Camera
Tester Borescope. This borescope paired with any security camera tester
adds a borescope function to your security camera tester.
Features
• Waterproof (IP67) 8mm camera (Lens only)
• 2m cable (6.5ft)
• 6 adjustable LEDs with thumbwheel control
• Power provided by the camera tester (12V 1/2/3A) — no batteries
needed
• Connection cables already included with your camera tester
• Utilizes the display resolution of your camera tester
• Image snapshot and Video record functions dependent on camera
tester capability
Safety
This product is designed for industrial inspection camera.
• Avoid severe hits to the camera probe, and do not aggressively
pull the cable.
• Please do not use it under high temperature, high magnetic
environments or under strong light.
• Do not expose this product to extremely low or high temperatures
• If used for extended periods of time, please take out of the Alkaline
battery from the device.
• Do not wipe the unit with corrosive chemical wash.
NOTICE:
WARNING ! This product is an industrial inspection camera and is
not intended for medical use or human examination.