User Manual

CCTV TESTER User Manual
12
Input calling dome camera menu address code, after finishing the parameter settings, you can press the key “Enter” or click the icon to
call the dome camera menu.
5.5 AHD camera test
When using an AHD signal input, the tester will display the image resolution at the top of the screen. Double tap on the screen to display
the image in full screen.
The tester supports resolution up to 3840 x 2160P 15 FPS.
(1) Coaxial PTZ control
UTC control: Select “PTZ or PTZ-2” (AHD camera has two different order, if the “PTZ” not working, pls go “PTZ-2” )
To use coaxial PTZ control with the AHD camera, no parameter settings are needed.