User Manual

CCTV TESTER User Manual
10
5.3 CVI camera test
When HD CVI signal input, the tester will display the image resolution at the top of the screen. Double tap on the screen to display the
image in full screen.
The tester supports resolution up to 3840 x 2160P 12.5/15 FPS.
（1）PTZ control
1.1 Coaxial PTZ control
Click the icon “PTZ” on the right toolbar to do the corresponding setting.
“Port”: select coaxial control
Enter PTZ address to perform parameters setting.
The PTZ address in the tester must be consistent with the dome camera or decoder for the IPC tester to work. After setting the
parameter, the tester can control the PTZ and lens.
Set preset position:
Move the PTZ camera to the preset position, tap it and input preset position number. Tap “Set position” to complete set preset position.
Call preset position:
Tap the preset position area, input preset position number. Tap “call position” to complete call preset position.
1.2 RS485 control