Datasheet
Page 16
On Screen Display (OSD)
The factory settings are defaulted to “50”. When the settings are
changed, the CamView W35 will remember them, even when the
power is turned off.
To select a specic setting to be altered, observe the location of the
yellow cursor bar and press and release the MENU key (3) repeatedly
until the bar highlights the desired setting.
Then use the “ ”key (4) or “ ”key (5) to change the value of the
setting as desired.
If another setting needs to be changed, again use the MENU key again
to highlight the desired setting, then use the “ ”key (4) or “ ”key (5)
to change the value of the setting as desired.
‘Brightness’, ‘Contrast’, ‘Sharpness’, ‘Volume’, and ‘Language’ (English
or Chinese) are self explanatory. ‘Saturation’ adjusts the amount of
color in the image from ‘Black and White’ to ‘Fully Saturated’. ‘50’ is
the normal setting.
Once everything is adjusted as desired, press and release the MENU
OFF key (6) to turn off the OSD and return to the video display mode.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor