Datasheet

Page 15
Connecting the Video and Audio Inputs:
A video signal can be connected to the CamView W35 in two places.
For the best durability, the BNC video input jack (11) should be used.
The video input on the side of the W35 (9) uses a mini-plug and is
more easily damaged that the BNC. However, if you need to put audio
into the monitor, the side connector (9) will have to be used with the
provided A/V cable.
Adjusting the Screen Settings:
To adjust the screen settings, a good video signal must be applied
to the monitor. If a video signal is not applied, the OSD (On Screen
Display) cannot be accessed.
With a video signal applied to the monitor, press and release the MENU
key (3). The OSD will appear as shown in the following gure.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor