Datasheet

Page 14
8: General Instructions
Turning the Product On:
After charging the batteries (see Section 7), slide switch (8) to its up-
per position to turn the product on. When operating from batteries, the
LED should light up green.
The CamView W35 continually tests for the presence and type of video
signals applied to its input. A few seconds after the power is turned
on, a CVBS box (Composite Video Baseband Signal) will appear in the
upper left corner of the LCD screen stating whether video is present,
and what the format is. If no video signal is present, the box will say
’CVBS No Signal’. If a recognized video signal is present, the box will
say ’CVBS NTSC’ or ’CVBS PAL’. Additional letters (like M or N) may
be displayed, identifying a particular version of NTSC or PAL. If the
video signal is removed and reapplied, the CVBS box will appear again
for a few seconds as the signal is recognized.
If no video signal is present, the product will enter a power saving
Standby mode. The screen will go black. The green LED will remain lit.
If video is present, it will be displayed on the LCD screen.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor