Datasheet

The WireMaster Mapper performs its ID test using only the cen-

ter two conductors of the RJ connector. The OPEN and SHORT /

CONTINUITY tests are only performed on these conductors. Other

wires in the cable may have OPENs or SHORTs, and the

WireMaster Mapper will not detect them.

Intermittent Connections

The WireMaster Mapper performs tests in real-time. That is, it is

continuously testing the target cable for the presence of a Re-

mote (some products only perform a momentary test). When a

cable is suspected of having an intermittent connection, a Re-

mote can be connected to one end of the cable, and the WireMaster

Mapper connected to the opposite end of the cable. The appro-

priate numbered ID LED should light on the WireMaster Mapper.

Flex the cable at its connectors and along its length (may require

2 people) while observing the ID LED on the WireMaster Map-

per. If an intermittent connection is found, the ID LED will flicker

or change value (like to SHORT or OPEN).

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor