Datasheet

2
WireMaster HDMI FEATURES
• Lightweight, Rugged, Simple to use
• Test fragile, easily damaged HDMI Patch Cables
and In-wall Cables before and after installation
• "X-Test" checks for Shorts, Opens, and Miswires in
all RGB conductors (most testers only test for Opens)
• Tests all HDMI cables with Type A connectors
• 2 Test Modes: Automatically scan and test all conductors in
a cable, or Manually test individual conductors for
intermittent faults
• Separate Transmitter and Receiver units provided for ultimate
versatility, especially when cable ends are in different rooms
• Uses 1 standard 9V battery
• Low Battery Indicator LED
• Padded, Cordura Carrying Case included
• One Year Warranty
INTRODUCTION
The Triplett WireMaster HDMI 2 High Definition Cable Tester is an
advanced tester utilizing X-TEST technology. It outperforms similar
products, identifying faults that other testers miss. Special circ-
uitry tests cables for new conductors in v1.4 cables typically used
to support Ethernet, 3D, Audio Return Channel, and 4K.
The WireMaster HDMI 2 employs both Autoscanning for quick test-
ing of all of the wires, and Manual testing for more rigorous test-
ing on individual wires. It works with all types of HDMI cables
with Type A connectors on their ends. It will test short patch cables
or long installed cables. Consisting of a Transmitter and a Receiver,
the cable is easily tested by connecting to the ends of the cable and
observing the LED displays. A built in battery test informs the user
when the 9 volt battery needs to be replaced.
HDMI Cables
Unlike other cables common in the work or household environ-
ment (coax, telephone, security, LAN, etc), HDMI cables are very
• Verifies conductor used in 1.4 applications
fragile and can be damaged by pulling on them too hard, pulling