Instructions / Assembly

SAVE THESE INSTRUCTIONS

Polarized Plug

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric

shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug

in any way.

Before plugging in

Make sure your electricity supply is the same as the electrical rating specified on the underside of the

power unit.

Before using for the first time

1 Remove all of the packaging.

2 Wash the parts: see “cleaning”.

3 Place the freezer bowl into a freezer a minimum of 12 hours before use.

4 Prepare the ice cream according to the instructions supplied with the Triple Scoop ice cream mix.

Specifications

Device type: Ice Cream Maker

Model TS-562

Voltage supply: AC120V 60Hz

Power consumption: 12W

Capacity during operation 1.5L Production class II

FOR BEST RESULTS, PRE-FREEZE YOUR ICE CREAM BOWL

FOR 24 HOURS PRIOR TO USE.

To use your ice cream maker:

Key

① power unit

② Lid

③ Paddle

④ freezer bowl

⑤ On/off button

1 Fit the power unit into the lid, it will click into place.

2 Fit the paddle into the power unit.

3 Remove the freezer bowl from the freezer.

4 Lower the assembled lid/power unit/paddle onto the freezer bowl,

aligning the three locking pins and turning clockwise to lock into

position.

5 You can now switch the ice cream maker on using the on/off button switch on.

6 Use the chute and pour the Triple Scoop ice cream mix into the freezer bowl.

7 Allow the mixture to churn until frozen or the desired consistency is reached. This can take up to 20 to

25 minutes, but most recipes will be ready in less time.

8 Switch off, remove the power unit/lid. The ice cream is ready to serve.