User's Manual

The shutoff unit alignment reset is necessary in order to indicate the CLM™

HUB that the unit is in the “CLOSED” position and thus prevents the water from

passing through the pipe.

+ Actuator Shutoff unit alignment reset

1. Regardless of the shutoff mounting, whether parallel or perpendicular to the

water flow direction, align the slot on the top part of the shutoff motor stem

perpendicularly to the water flow direction. If the stem slot is parallel to the

water flow direction after the shutoff mounting, the shutoff has to be toggled

manually by pressing the unit button for 2 seconds.

3. Reset the shutoff unit alignment by pressing on the shutoff unit button for at

least 20 seconds. The RGB LED on the top part of the shutoff enclosure

should turn ON and remain GREEN so for 10 seconds after the successful

alignment reset.

4. Once the alignment is reset, toggle the shutoff unit to the “OPENED” position

manually by pressing on the button.

5. Enable passage of water in the main line and prevent leaks or drippings.