User's Manual

+ Shutoff unit setup and mounting
Parallel
Shutoff unit
mounting
Perpendicular
Shutoff unit
mounting
1. Locate the most suitable place for
installation on the water line.
2. Shut down the water supply, using
the main valve of the building or site.
3. Mount the neck assembly on the
shutoff and install it on ISO5211
mounting pad using the attached
screws, washers and nuts. Please
note, that the long neck is necessary
while mounting the shutoff in parallel
with the water pipe and the short
neck is required when the shutoff is
mounted perpendicularly to the water
pipe.
4. Once the shutoff unit is installed,
push the lock wire inwards until it
reaches a mechanical limit.
23