User's Manual

When interested in HUB wall mounting, please follow the following instructions:

+ HUB installation

1. Detach the HUB from the table stand

as described below.

2. Attach the wall mounting bracket to intended

location and mark the holes for the

mounting screws.

3. Connect the HUB to the AC/DC adaptor jack.

Plug the LAN cable into the LAN inlet, if the

HUB will be permanently operated via the LAN.

4. Position the HUB on its permanent location. For

wall mounting, bring the HUB’s rear mounting

pins close to the wall and gently slide it down the

wall mount’s dimples. Please do not attempt to

rotate the HUB on the mounting in order to avoid

physical damage to the enclosure.

5. For table mounting, connect the table stand

to the HUB and place it on the table.

External

Adaptor

Jack

LAN Inlet