Installation Guide
1
1
2
2
3
3
4
4
1. Drill the appropriate drill size hole into drywall/wallboard, brick
or concrete. (Please refer to the product packaging for the
appropriate drill sizes)
2. Insert the TripleGrip
®
into the hole.Tap in ush to the wall.
3. Insert the screw through the object you need to afx and into
the TripleGrip
®
up to the point where the head screw touchs
the wall to allow the TripleGrip
®
to open behind the wall.
4. Continue to screw until there is a strong resistance.