Installation Guide

INSTALLING THE FILTER:
1. (a)Turn off
the cold water
supply, (b)open
cold water
faucet and
(c)cut into
existing 3/8”
supply lines.
Once supply line
has been cut,
(d)close cold
water faucet.
2. Install
isolation valve
on each side of
the cut supply
line by fully
inserting supply
line tubing into
socket of the
isolation valve.
Tubing should
insert 3/4 to 7/8”
into isolation
valve socket.
NOTE: VALVES SHOULD BE IN THE CLOSED
POSITION DURING INSTALLATION
3. Insert
one piece of
the opaque
supply tubing
into the other
side of each
isolation
valve. Tubing
should insert
3/4 to 7/8”
into isolation
valve socket.
4. Install the Triple Clear Force
Field Filter into the mounting
bracket, ensuring inlet and outlet
are appropriately located.