Installation Guide

5. Insert appropriate opaque
tubing into the inlet side of the
Triple Clear Force Field Filter.
Tubing should insert 3/4 to 7/8”
into the inlet side.
6. Insert other opaque
tubing into the outlet
side of the Triple Clear
Force Field Filter. Tubing
should insert 3/4 to 7/8”
into the outlet side.
3. Fasten the bracket to the wall using the four mounting screws
included and the anchors as necessary.
4. Verify the mounting bracket is secure.
INSTALLING THE MOUNTING BRACKET:
1. Select a location for the mounting bracket. For ease of filter
replacement select a location that offers easy access.
2. Using the level place the mounting bracket level against the
wall and mark the four screw holes.