Owner's manual

MEMORY CARD
SLOT
SERIAL
CONNECTIONS
The bottom 2 pins of input connector 1 are used to provide the 24V
dc power to the MC224. A 24V dc, Class 2 transformer or power
source must be provided.
This 24 Volt input also supplies power to the I/O 24 Volts and any
daughter boards fi tted.
The MC224 is grounded via the metal case. It MUST be installed
on an unpainted metal plate which is connected to earth.
Pin Function Note
1Internal 5V
2Internal 0V
3RS232 Transmit
4RS232 0V Serial Port #0
5RS232 Receive
6+5V output
7 Externally buffered output (TTL) For fi bre-optic
adaptor.
8 Externally buffered input (TTL)
Note: Port 0 is the default programming port for connection to the PC running Motion
Perfect.
POWER
CONNECTOR
Serial Connector A
1
2
3
4
6
7
5
8
A memory slot is provided for the NexFlash memory stick or
P396 SD Card adaptor. Available seperately.