User's Manual

9
Document Number: 0100SM1401 Issue: 12-16
Common Features – QR | QB | QP | QH
Radio
VHF Frequency Band Operation: 135...175 MHz
UHF Frequency Band Operation : 400...450 MHz and 450...518 MHz
12.5kHz and 25kHz channel operation in one radio model
User configurable transmitter output power up to 10 Watts
Coverage of common international frequency bands
Designed to meet international FCC & ETSI radio regulatory requirements
VSWR and over temperature protection
Operation over full -40...70°C (-40...158°F) ambient temperature range
Automatic frequency offset compensation for years of service/calibration free operation
Ethernet
Transport of Ethernet based protocols (including UDP, TCP, DHCP, ARP, ICMP, STP, IGMP, SNTP & TFPT)
Layer-2 Ethernet Bridge Mode & Layer-3 IP Router mode
VLAN capability (Bridge mode)
Maximum narrowband channel utilisation with smart peer-to-peer repeating, broadcast filtering and data compression
SNMP access to radio diagnostics parameters (including alarm detection and traps)
Legacy RS-232/RS-485 serial support via embedded terminal servers (UDP/TCP) and MODBUS/TCP gateway
Configuration via embedded HTTP, HTTPS web interface and/or Telnet/SSH/Serial console
Local and (one to N) broadcast firmware upgrades
Embedded NTP Time Server (NTP Client / Server / Client-Server / Manual modes)
Modem
Dynamic Speed Selection: QoS/RSSI based automatic speed selection (or fixed mode)
RF Data Rates: Up to 32kbps in a 12.5kHz ETSI Channel & 56kbps in a 25kHz Channel
Advanced Digital dynamic supervisory collision avoidance system
Security
Support for 256-bit AES encryption
#
Password protected HTTP and HTTPS configuration/diagnostics management interface
Password protected Telnet, SSH and Serial console interface
User administration for radio access
Diagnostics
Compatible with the Trio TVIEW+ Diagnostics Network Management Software
Embedded error rate testing facilities
Diagnostics parameters available for Tx Power, RSSI, DC Supply Volts, Frequency Offset, Temperature and VSWR
In-build event logging facility
Approvals
Europe (ETSI): ETSI EN 300 113, EN 301 489, EN 60950
United States (FCC): FCC Part 15, Part 90
Canada (IC): IC RS119, ICES-001
Australia (ACMA): ACMA AS4295-1995 (Data)
#: Export and import restrictions may apply.
Features and Benefits
Part B – Feature Overview