User's Manual

165
Document Number: 0100SM1401 Issue: 12-16
2) Open the Firmware Upgrade Tool: Open TView+ Management Suit, select the ‘Firmware Update’ button. This will open the
Firmware upgrade page. Once open, select the ‘Q-Series Firmware Upgrade’ Button. This will open the Global Firmware Upgrade tool
for Q-Series.
This will open the Global firmware upgrade tool.
Step by step instructions
1) Radio Pre-Configuration: Before performing a global firmware upgrade, ensure that each radio being upgraded has been pre-
configured with the following common settings:
• SNMP: The firmware upgrade tool utilises the SNMP protocol, therefor, each radio requires the following pre-configuration:
- SNMP Enabled:
- SNMP Version: V1 or V2c
- Read/Write Community String: (default sting is: private)
• Mask: The firmware upgrade tool will address packets to the radio network’s broadcast address. The broadcast address of a
radio is defined by the subnet mask.
Part J – Firmware Updating and Maintenance