User's Manual

123
Document Number: 0100SM1401 Issue: 12-16
Ethernet Stream ID (SID) (Setup -> Radio -> System Parameters) provides the configuration option of Ethernet SID to be used
Serial Rx/Tx SIDs (Setup -> Serial COM 1 (or 2) provides the configuration options of the Serial SIDs to be used
Radio configuration is still performed via WUI or TUI (not via TView+ Programmer).
For detailed information on E-Series parameters, refer to the E-Series user manual.
Part G – Quick Start Guide
Type (Setup -> Radio -> Modulation) the following bandwidth/data rates are supported. Availability is dependant on the
regional approval of the radio (ACMA/ETSI/FCC):
• E-Series
9600 12.5 kHz ACA 4 Level
19200 25.0 kHz ACA 4 Level
9600 12.5 kHz FCC 4 Level
19200 12.5 kHz FCC 4 Level
19200 25.0 kHz FCC 2 Level
9600 12.5 kHz ETSI 4 Level
For BER specifications and/or sensitivities, refer to the corresponding E or M Series Data sheet.
• M-Series
9600 25.0kHz ACA M-Series
4800 12.5kHz ACA M-Series
4800 25.0kHz ACA M-Series
2400 12.5kHz ACA M-Series
9600 12.5kHz FCC M-Series
4800 12.5kHz ETSI M-Series