User's Manual
Table Of Contents
- Part A – Preface
- Safety Information
- Revision History
- Important Information
- Compliance Information
- Part B – Feature Overview
- Introduction
- Features and Benefits
- Q Data Radio Range
- Part C – System Topologies & Operating Modes
- System Topologies
- Operating Modes
- Part D – Feature Detail
- Hardware
- Efficiency and Bandwidth
- Connectivity
- Ease of Use
- Security
- Part E – Radio Planning and Design
- Radio Path analysis
- BER & Fade Margin
- Radio Accessories
- RF Feeders and Protection
- Part F – Quick Reference Guide
- Introduction
- Half Duplex Radio - QR450
- Full Duplex Radio - QB450
- Hot Standby Half Duplex Radio - QP450
- Hot Standby Full Duplex Radio - QH450
- LED indicators
- Connecting Antennas
- Communication Ports
- Activating Transmitter
- Factory Default
- Digital I/O
- Connecting to Web User Interface (WUI)
- Resolving Ethernet Connection Issues
- Part G– Quick Start Guide
- Step-by-Step Point to Point Setup
- Step-by-Step eDiags Setup
- System Topology Configuration
- Serial and MODBUS
- Single Frequency (Simplex) Mode
- E-Series Emulation Mode
- Part H – Advanced
- Connectivity
- Ease of Use
- Security
- Part I – Installation & Commissioning
- Optimising the Antenna for Rx Signal
- Commissioning
- Part J – Firmware Updating and Maintenance
- Firmware Updating
- Global Firmware Updating
- Fuse Replacement - QR450
- Part K – Open Source License Acknowledgements
- Part L – Support Options
9
Document Number: 0100SM1401 Issue: 05-15
• Simplex or Half duplex operation
• Small form factor, rugged die cast housing
115 x 34 x 164mm (4.52” x 1.33” x 6.45”)
• 10-30 V DC supply voltage.
• DIN Rail Mounting Kit Option
(TBURDIN-KIT-TYPEA)
• Suitable for use in Class I, Division 2, Groups A, B,
C & D hazardous locations
Half Duplex Radio
Full Duplex Base Radio
Half Duplex Hot Standby Base Radio
Q Data Radio Range
Part B – Feature Overview
• Simplex or Half duplex operation
• Duplicated redundant transceiver configuration
• Automatic change-over
• 19" 1RU rack mount
• Digital Inputs & Outputs
• Full Duplex operation (100% duty cycle)
• 19" 1RU rack mount
• Digital Inputs & Outputs
QR450 - Half Duplex Radio
The QR450 Half Duplex Radio is ideal for remote applications as it has a smaller form factor, allowing the product to be
installed in space restricted cabinets/enclosures. The QR450 can also be used as an Entry Point (Base/Master Station) or
repeater for systems with a small number of remotes where the transmitter duty cycle is low.
Features of the QR450 include:
QP450 - Hot Standby Half Duplex Radio
The QP450 half duplex radio is ideal for deployment at base & repeater sites in systems using two frequency (half duplex) or
single frequency (simplex) operation, where it will only be required to transmit OR receive. In high duty cycle applications, the
QP450 delivers maximum rated transmitter power in ambient temperatures up to +70°C (158°F).
The features of the QP450 include:
QB450 - Full Duplex Radio
Complimenting the QR450 half duplex remote radio, the QB450 full duplex radio is ideal for deployment at base & repeater
sites in systems using two frequency operation. In high duty cycle applications, the QB450 delivers maximum rated
transmitter power in ambient temperatures up to +70°C (158°F). Where 1+1 hot standby redundancy is required, the half
duplex QP450 and the full duplex QH450 are available.
Features of the QB450 include: