User's Manual
Table Of Contents
- Part A – Preface
- Safety Information
- Revision History
- Important Information
- Compliance Information
- Part B – Feature Overview
- Introduction
- Features and Benefits
- Q Data Radio Range
- Part C – System Topologies & Operating Modes
- System Topologies
- Operating Modes
- Part D – Feature Detail
- Hardware
- Efficiency and Bandwidth
- Connectivity
- Ease of Use
- Security
- Part E – Radio Planning and Design
- Radio Path analysis
- BER & Fade Margin
- Radio Accessories
- RF Feeders and Protection
- Part F – Quick Reference Guide
- Introduction
- Half Duplex Radio - QR450
- Full Duplex Radio - QB450
- Hot Standby Half Duplex Radio - QP450
- Hot Standby Full Duplex Radio - QH450
- LED indicators
- Connecting Antennas
- Communication Ports
- Activating Transmitter
- Factory Default
- Digital I/O
- Connecting to Web User Interface (WUI)
- Resolving Ethernet Connection Issues
- Part G– Quick Start Guide
- Step-by-Step Point to Point Setup
- Step-by-Step eDiags Setup
- System Topology Configuration
- Serial and MODBUS
- Single Frequency (Simplex) Mode
- E-Series Emulation Mode
- Part H – Advanced
- Connectivity
- Ease of Use
- Security
- Part I – Installation & Commissioning
- Optimising the Antenna for Rx Signal
- Commissioning
- Part J – Firmware Updating and Maintenance
- Firmware Updating
- Global Firmware Updating
- Fuse Replacement - QR450
- Part K – Open Source License Acknowledgements
- Part L – Support Options
126 Document Number: 0100SM1401 Issue: 05-15
Digital Input 2 Notification
Notification Name notificationDigitalInput2Notification
Notification OID .1.3.6.1.4.1.33302.30.10.21
Digital Input 2 Notification Objects
Name OID Position Specific
Code
Description
digitalInput .1.3.6.1.4.1.33302.30.6.2.1.2.2 0 21 Digital input 2 value
Digital Input 1 Notification
Notification Name notificationDigitalInput1Notification
Notification OID .1.3.6.1.4.1.33302.30.10.20
Digital Input 1 Notification Objects
Name OID Position Specific
Code
Description
digitalInput .1.3.6.1.4.1.33302.30.6.2.1.2.1 0 20 Digital input 1 value
SNMP - QB, QP & QH Specific Notifications
Digital Input 3 Notification
Notification Name notificationDigitalInput3Notification
Notification OID .1.3.6.1.4.1.33302.30.10.22
Digital Input 3 Notification Objects
Name OID Position Specific
Code
Description
digitalInput .1.3.6.1.4.1.33302.30.6.2.1.2.3 0 22 Digital input 3 value
Fan Alarm Detection Notification
Notification Name notificationFanAlarmChanged
Notification OID .1.3.6.1.4.1.33302.30.10.23
Fan Alarm Detection Notification Objects
Name OID Position Specific
Code
Description
chassisFanStatus .1.3.6.1.4.1.33302.30.6.4.1.3.1 0 23 Fan 1 Status
chassisFanStatus .1.3.6.1.4.1.33302.30.6.4.1.3.2 1 23 Fan 2 Status
Part H – Advanced