Solar Plant Stake Assembly Instructions Product Pole Note: Product pole will vary depending on the item purchased. Bottom Pole Step 1: Attach product pole (A) to bottom pole (B) by sliding bottom pole into product pole.
OPERATION ON/OFF: The unit is shipped in the OFF position. Locate the ON/OFF button on the bottom of the solar unit and slide it into the ON position (Photo #1). In the ON position, the solar cell will light up automatically at dusk and will shut OFF automatically when the solar panel is exposed to daylight. Photo 1 Location: Select a sunny location. Place the unit in direct sunlight for at least one day to fully charge the battery.
