User's Manual

9 10
BASIC OPERATION-1 BASIC OPERATION-2
Wireless LAN Mode Switch :
ST1( ): Station mode for connection with the VPU
ST2 ( ) : Station mode for connection with the back End Server (BES)
AP ( ): AP mode for the live view of the system via smart phone application
OFF ( ): Turn off the Wireless LAN
3) I/O Terminal
Micro USB Connector/ Magnetic USB Terminal :
It will be used for charging and USB connection.
The charging time depends on the connected device,
PC: longer than 6hours
Charger : less than 3hours
Not recommended USB HUB.
2
nd
Camera Connector :
It will be used for connecting with 2
nd
Camera.
1) Buttons
Recording Button:
To start the recording, press the recording button shortly.
To stop the recording, press and hold the recording button for more than two
seconds.
Snapshot Button:
To take the snapshot, press the snapshot button shortly.
2) Slide Switch
Power ON / OFF :
The power switch has 2 positions of slide switch as ON / OFF.
Turn the power ON / OFF, move the power switch to ON/OFF position.
* Notice : SA366 will close files safely by software controlling.
Classify Button and Classify ID Switch :
It can sort the recorded files. The classify ID can be recorded if the classify
button pressed after selecting one of C1/ C2/ C3 in the classify ID switch.
Indicate Mode Switch :
The indicate mode switch has 4 positions of slide switch as listed below
indication.
- LED and Vibrator Mode : Indicate the operation or status of system via
LED and Vibrator.
- LED Mode : Indicate the operation or status of system via LED indicator
- Vibrator Mode : Indicate the operation or status of system via Vibrator
- None Mode : It doesn’t indicate the operation or status of system