User's Manual

OPERATION (TX)

REC,TALK On/Off

6 Internal MIC

2 BEEP 7 Power On/Off

3MODE

4MUTE ON/FF

5 Microphone Jack

1. REC On/Off button

* LED : REC & Talk On/Off – Green LED On/Off

Mute On – Green LED blinking

Low Battery – Red LED blinking

Out of Range – Red LED steady On

2. Beep: Beep Tone

3. Mode: Beep > Vibration > Beep + Vibration > NO action

Every time you push the button, mode will be automatically

changed in order. (This Function operate only at St-by mode)

4. Mute On/Off:

When user want to mute the voice in the Communication.

Press the button to mute and press the button again to not-mute.

5. Microphone Jack (* Lapel MIC is optional)

6. Internal MIC

7. Power On/Off: Turn on/off the power of unit. When this is turned

off, Unit will not work.

1 Antenna connection (external Antenna)

2 LED : Recording ON/OFF, ID Matching

3 LED : Battery Charging Status

4Charging PIN

5 RJ-45 Jack

1. Antenna Connection

2. LED : REC & TALK On/Off – Green LED On/Off

ID Matching On – Green LED blinking

3. LED : Battery Charging – Red LED on

Battery is fully charged – Green LED on

4. Charging Pin

5. RJ45 Jack for the cable

OPERATION (Cradle)