User's Manual
Table Of Contents
- Support
- Safety and General Information
- Regulatory Information
- System Overview
- About this Guide
- Package Contents
- Transmitter Controls and Features
- Transmitter Indications
- Receiver Controls and Features
- Desktop Charger Controls and Features
- Getting Started
- Operation
- Troubleshooting
- Care and Maintenance
- Specifications
26 Wireless Microphone System
Specifications
Power: Transmitter: Lithium Ion battery 3.7V DC
(Motorola BT90) / 1800mA,
Receiver: 12V DC, / 850mA maximum
current when charging.
Desktop Charger: Input Voltage: 12V DC
Output Voltage: 3.7V DC, Power Supply
unit: Input: 110/220V AC 60Hz, 1.25A.
Power Consumption: Min 100mW, Max 446mW
Communication Range: 1000 feet
Frequency: 2.4GHz FHSS with 2,400 ~ 2,483MHz
Number of Channel: 95 Channels
Channels Space: 864KHz
Speech Coder: 32Kbits/sec ADPCM transcoder
Type of Modulation: GFSK Modulation
Data Rate: 576Kbps Time Division Duplex
Receiver Sensitivity: -88 ~ -96 dBm Typical: -92 ~ -94 dBm
Talk Time: Over 12 Hours (with full battery)
Charge Time: 3.5 Hours (When Transmitter power switch
is off and charging start point is 3.6
voltage)
Temperature Range: Operating: 4°F ~ 140°F (-20°C ~ 60°C)
Storage: 4°F ~ 140°F (-20°C ~ 60°C)
Dimensions (L x W x H): Transmitter: 54mm x 27mm x 73mm (2.13”
x 1.06” x 2.87”)
Receiver: 89.5mm x 57mm x 85mm (3.52”
x 2.24” x 2.66”)
Specifications are subject to change without notification.