User's Manual
Table Of Contents
- Support
- Safety and General Information
- Regulatory Information
- System Overview
- About this Guide
- Package Contents
- Transmitter Controls and Features
- Transmitter Indications
- Receiver Controls and Features
- Desktop Charger Controls and Features
- Getting Started
- Operation
- Troubleshooting
- Care and Maintenance
- Specifications
User Guide 17
Installing the Receiver Antenna
To install the Receiver antenna:
1. Determine the mounting location for the antenna.
NOTE The Receiver antenna is installed on flat surface, in an upright position.
2. Use standard glass cleaner and a soft cloth to clean the installation
surface.
3. Remove the protective film from the back of the antenna and attach
the antenna to the installation surface. Firmly press on the antenna to
adhere the antenna to the desired location.
4. Route the antenna cable to the Receiver.