User's Manual
Table Of Contents
- Support
- Safety and General Information
- Regulatory Information
- System Overview
- About this Guide
- Package Contents
- Transmitter Controls and Features
- Transmitter Indications
- Receiver Controls and Features
- Desktop Charger Controls and Features
- Getting Started
- Operation
- Troubleshooting
- Care and Maintenance
- Specifications
16 Wireless Microphone System
Installing the Receiver
To mount the Receiver:
1. Use the Mounting Bracket to mark the screws location.
2. Use the three supplied screws to secure the Mounting Bracket.
3. Slide the back side of the Receiver onto the Mounting Bracket.
4. Connect the System Cord to the System Cord Connector on the back
of the Receiver.
5. Connect the System Cord to the recording unit.
System Cord
Receiver
Mounting Bracket
Recording Unit
Antenna