Instruction Manual

7
4. REPEAT STEPS 3 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
5. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS “PLAY/PAUSE”
BUTTON TO PLAY THE TRACKS IN ASSIGNED ORDER.
6. PRESS STOP BUTTON TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS STOP
BUTTON AGAIN TO CANCEL PROGRAMMING.
FILE DELETE FROM USB / SD CARD
THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB DRIVE OR SD CARD BY
FOLLOWING:-
I) DELETE 1 TRACK
1. PRESS AND HOLD DEL BUTTON FOR 3-5 SECONDS DURING THE PLAYBACK OF THE
DESIRED TRACK, THEN “ONE” WILL BE FLASHING ON THE DISPLAY. PRESS DEL BUTTON AGAIN
TO CONFIRM.
2. “DEL” WILL BE SHOWN ON THE DISPLAY.
3. “DEL” WILL DISAPPEAR ON THE DISPLAY, IT MEANS THE TRACK IS DELETED.
II) DELETE 1 FOLDER
1. INSERT THE USB STORAGE MEDIA OR SD/MMC CARD, SET IN “USB” OR “CARD” MODE & SET
AT STOP MODE AFTER UNIT READING.
2. PRESS ALBUM DOWN OR ALBUM UP TO SEARCH DESIRED FOLDER FOR DELETING.
3. PRESS AND HOLD DEL BUTTON FOR 3-5 SECONDS, “DEL” WILL SHOW ON THE DISPLAY.
PRESSING SKIP UP / SKIP DOWN BUTTON TO SELECT “DIR” ON THE DISPLAY.
PRESS DEL BUTTON AGAIN TO CONFIRM.
4. “DEL” WILL BE SHOWN ON THE DISPLAY. AFTER “DEL” DISAPPEARS IT MEANS THE DESIRED
FOLDER IS DELETED.
II) DELETE ALL TRACK
1. INSERT THE USB STORAGE MEDIA OR SD/MMC CARD, SET IN “USB” OR “CARD” MODE & SET
AT STOP MODE AFTER UNIT READING.
2. PRESS AND HOLD DEL BUTTON FOR 3-5 SECONDS, THEN “ONE” WLL BE FLASHING ON THE
DISPLAY. PRESSING SKIP UP / SKIP DOWN BUTTON TO SELECT “ALL” ON THE
DISPLAY. PRESS DEL BUTTON AGAIN TO CONFIRM.
3. USB OR SD ICON WILL BE FLASHING ON THE DISPLAY. DELETING IS PERFORMING NOW.
4. WHEN THE USB OR SD ICON STOPS FLASHING, IT MEANS THAT ALL TRACK COPYING IS
COMPLETED.
REMARK : ALL THE FILES INSIDE THE USB STORAGE MEDIA WILL BE DELETED COMPLETELY
AFTER CONFIRMING TO “DEL” BUTTON.
COMPACT DISC (CD) PLAYBACK & ENCODING
1. PRESS FUNCTION BUTTON REPEATEDLY TO SELECT “CD” ON DISPLAY.
2. PRESS CD DOOR OPEN/CLOSE BUTTON, CD DOOR WILL BE OPENED, PUT THE CD IN THE
TRAY AND PRESS CD DOOR BUTTON AGAIN, CD DOOR WILL BE CLOSED.
3.THE SYSTEM WILL START READING THE CD:
 PLAY / PAUSE BUTTON
- PRESS THE PLAY/PAUSE BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO
CONTINUE.
 STOP BUTTON
- PRESS THE STOP BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW
THE TOTAL NUMBER OF TRACKS. AND THEN USER CAN PRESS SKIP UP / SKIP DOWN
BUTTON TO SELECT TRACKS.
 SKIP UP / SKIP DOWN BUTTON
- DURING CD PLAYBACK, PRESS SKIP UP BUTTON ONCE TO PLAY THE NEXT FILE.
PRESS AND HOLD SKIP UP BUTTON CONTINUOUSLY TO SPEED UP SELECTING
FORWARD
- DURING CD PLAYBACK, PRESS SKIP DOWN BUTTON ONCE TO PLAY THE PREVIOUS