Instruction Manual

6
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 / WMA FILE WHICH STORED IN THE
MEMORY MEDIA WITH USB SLOT.
1. PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT GOING INTO COMPLETELY,
INSERT STRAIGHT WITHOUT BENDING.
2. CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD DAMAGE THE AUDIO
SYSTEM. CHECK TO BE SURE THE DIRECTION IS CORRECT BEFORE CONNECTION.
3. PRESS FUNCTION BUTTON REPEATEDLY TO SELECT “USB” ON DISPLAY.
4. THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER
FUNCTION SELECTION, AND DISPLAY WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES
(EG. 016).
5. THEN THE SYSTEM WILL START AUDIO PLAYBACK FROM DESRIED DEVICE (USB OR SD/MMC)
AUTOMATICALLY.
 PLAY / PAUSE BUTTON
- PRESS THE “PLAY/PAUSE” BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO
CONTINUE.
 STOP BUTTON
- PRESS STOP BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW THE
TOTAL NUMBER OF MP3/WMA FILES. AND THEN USER CAN PRESS “SKIP UP” OR “SKIP
DOWN” BUTTON TO SELECT FILE FORWARD OR BACKWARD.
 SKIP UP / SKIP DOWN BUTTON
- DURING MP3/WMA PLAYBACK, PRESS SKIP UP BUTTON ONCE TO PLAY THE NEXT FILE.
PRESS AND HOLD SKIP UP BUTTON CONTINUOUSLY TO SPEED UP SELECTING
FORWARD.
- DURING MP3/WMA PLAYBACK, PRESS SKIP DOWN KNOB ONCE TO PLAY THE
PREVIOUS FILE. PRESS AND HOLD SKIP DOWN BUTTON CONTINUOUSLY TO SPEED UP
SELECTING BACKWARD.
 FOLDER SEARCHING
PRESS ALBUM DOWN OR ALBUM UP BUTTON TO SEARCH FOLDER BACKWARD OR
FORWARD.
 REPEAT FUNCTION
DURING AUDIO PLAYBACK, PRESS MODE BUTTON REPEATEDLY TO CHOOSE DIFFERENT
PLAYBACK MODE AS BELOW:
REPEAT ONCE > REPEAT ALBUM > REPEAT ALL > RANDOM > INTRODUCTION
REMARK
- IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN
MP3 ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB
SOCKET. THIS IS NOT A MALFUNCTION OF THE SYSTEM.
- THERE ARE NUMEROUS USB DEVICE PRODUCERS ARE. SOLUTION AND FORMAT ARE
VARIABLE BETEEN EACH OTHER. THEREFORE, WE DO NOT GARANTTEE THIS UNIT CAN
SUPPORT ALL USB DEVICE FROM EVERY BRAND.
TRACKS PROGRAMMING
UP TO 99 TRACKS CAN BE PROGRAMMED FOR MP3/WMA FILE AND PLAY IN ANY ORDER.
BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:
1. SET AT “USB” FUNCTION, THEN PRESS STOP BUTTON.
2. PRESS MODE BUTTON, “MEM” WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL
INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3. SELECT A DESIRED FOLDER (IF NECESSARY) BY PRESSING ALBUM DOWN AND UP BUTTON,
THEN SELECT DESIRED TRACK BY PRESSING SKIP UP OR SKIP DOWN BUTTON,
PRESS MODE BUTTON TO CONFIRM.