Instruction Manual

5
1. PRESS FUNCTION BUTTON TO SELECT “PHON” ON DISPLAY.
2. PRESS 33RPM/45RPM SPEED BUTTON TO THE PROPER POSITION DEPENDING ON THE
RECORD TO BE PLAYED. DISPLAY LCD WILL SHOW 33rM for 33RPM and 45rM for 45RPM.
3. PLACE THE RECORD ON THE PLATTER, USE THE 45 RPM ADAPTOR IF
REQUIRED.
4. PUSH THE LIFT LEVER UPWARD TO RAISE THE TONE ARM FROM THE ARM
PARK, AND THEN SLOWLY MOVE IT TO THE RECORD SIDE. THE PLATTER
WILL START TO ROTATE.
5. PUT DOWN THE LIFT LEVER TO DROP THE TONE ARM AND TOUCH THE
RECORD GENTLY. PHONO PLAYING STARTS NOW.
6. PUSH THE LIFT LEVER UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, NOW
PLATTER WILL STILL BE ROTATING BUT PHONO PLAYING WILL STOP. TO CONTINUE THE
PLAYING, THE USER NEEDS TO PUT DOWN THE LIFT LEVER.
7. ADJUST THE VOLUME TO THE DESIRED LEVEL.
8. STROB DOTS ON THE TURNTABLE PLATTER FOR SPEED CHECKING. UPPER ROWS OF
BIGGER DOTS. FOR 33RPM, UPPER ROWS OF SMALLER DOTS FOR 45RPM. ADJUST SPEED
BY PITCH CONTROL KNOB IF NECESSARY. SUITABLE DOTS WILL KEEP STABLIZED UNDER
STROB LIGHT IF THE SPEED IS CORRECT.
9. AT THE END OF RECORD, TURNTABLE WILL STOP AUTOMATICALLY. PUSH THE LIFT LEVER
UPWARD TO RAISE THE TONE ARM AND MOVE IT TO THE ARM PARK, THEN PUT DOWN THE
LIFT LEVER AND RETURN IT TO THE ARM PARK.
PHONO ENCODING
1. PRESS FUNCTION BUTTON TO ACTIVATE “PHON” ON DISPLAY AND THEN INSERT MEMORY
DEVICE (USB DRIVE).
2.PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDS TO READ MEMORY DEVICE. THEN USB
ICON WILL BE FLASHING.
3.THE USB ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
5.TO FINISH ENCODING, PRESS STOP BUTTON AND DISPLAY WILL SHOW “END” AND RETURN
TO PHONO MODE.
REMARK:-
- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE
PHONO
- THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS
AUX IN JACK & ENCODING
PRESS FUNCTION BUTTON TO ACTIVATE “AUX” ON DISPLAY, THEN CONNECT THE EXTERNAL
AUDIO DEVICE (SUCH AS CD PLAYER) THROUGH THE AUX IN JACK. AUDIO SIGNAL FROM THE
EXTERNAL AUDIO DEVICE CAN BE PLAYED THROUGH THE SYSTEM.
AUX IN ENCODING
1. PRESS FUNCTION BUTTON TO SELECT “AUX” ON DISPLAY, THEN INSERT MEMORY DEVICE
(USB DRIVE)
2.PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDSS TO READ MEMORY DEVICE. THEN USB
ICON WILL BE FLASHING.
3.THE USB ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
6.TO FINISH ENCODING, PRESS STOP BUTTON AND DISPLAY WILL SHOW “END” AND RETURN
TO “AUX” MODE.
REMARK:-
- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE
EXTERNAL AUDIO DEVICE.
- THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS