COMMANDER 2 SPEED TURNTABLE WITH CD/MP3 PLAYER, FM/AM RADIO, AUX IN USB ENCODING, TURNTABLE PITCH CONNTROL, BLUETOOTH AND EXTERNAL SPEAKER BOX INSTRUCTION MANUAL READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE 1
PRODUCT FEATURES - 33/45 RPM SELECTABLE TURNTABLE - AUTO STOP TURNTABLE - BELT DRIVEN SYSTEM - BLUETOOTH WIRELESS MUSIC STREAMING - PRORAMMABLE CD/MP3 PLAYER - DIRECT USB ENCODING FOR CD, TURNTABLE, FM RADIO & AUX IN - AUX IN FOR CONNECTION OF OTHER DEVICE (EG.
CAUTION: USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE. THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. WARNING: - THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
5. SETTING ALARM VOLUME: “V - ” IS LIGHTING UP ON THE DISPLAY: i. PRESSING SKIP UP OR SKIP DOWN BUTTON TO SELECT THE ALARM VOLUME, PRESS TIMER BUTTON AGAIN TO CONFIRM. 6. SETTING ALARM IS COMPLETED, THE DISPLAY WILL SHOW THE SETTING AGAIN FOR USER’S CHECKING 7. “CLOCK” ICON IS FLASHING WHEN ALARM IS IN ACTIVE. “CLOCK” ICON LIGHTS UP WHEN ALARM IS SETTING IS STORED BUT NOT IN ACTIVE YET. 8. CANCEL ALARM: DURING STANDBY MODE, WHEN “CLOCK” ICON IS ON, PRESS TIMER BUTTON, “CLOCK” ICON WILL BE OFF.
1. PRESS FUNCTION BUTTON TO SELECT “PHON” ON DISPLAY. 2. PRESS 33RPM/45RPM SPEED BUTTON TO THE PROPER POSITION DEPENDING ON THE RECORD TO BE PLAYED. DISPLAY LCD WILL SHOW 33rM for 33RPM and 45rM for 45RPM. 3. PLACE THE RECORD ON THE PLATTER, USE THE 45 RPM ADAPTOR IF REQUIRED. 4. PUSH THE LIFT LEVER UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, AND THEN SLOWLY MOVE IT TO THE RECORD SIDE. THE PLATTER WILL START TO ROTATE. 5. PUT DOWN THE LIFT LEVER TO DROP THE TONE ARM AND TOUCH THE RECORD GENTLY.
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD CONNECTING THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 / WMA FILE WHICH STORED IN THE MEMORY MEDIA WITH USB SLOT. 1. PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT GOING INTO COMPLETELY, INSERT STRAIGHT WITHOUT BENDING. 2. CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD DAMAGE THE AUDIO SYSTEM. CHECK TO BE SURE THE DIRECTION IS CORRECT BEFORE CONNECTION. 3. PRESS FUNCTION BUTTON REPEATEDLY TO SELECT “USB” ON DISPLAY. 4.
4. REPEAT STEPS 3 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY. 5. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS “PLAY/PAUSE” BUTTON TO PLAY THE TRACKS IN ASSIGNED ORDER. 6. PRESS STOP BUTTON TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS STOP BUTTON AGAIN TO CANCEL PROGRAMMING. FILE DELETE FROM USB / SD CARD THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB DRIVE OR SD CARD BY FOLLOWING:I) DELETE 1 TRACK 1.
FILE. PRESS AND HOLD SKIP DOWN SELECTING BACKWARD. BUTTON CONTINUOUSLY TO SPEED UP FOLDER SEARCHING PRESS ALBUM DOWN OR ALBUM UP TO SEARCH FOLDER BACKWARD OR FORWARD. REPEAT FUNCTION DURING AUDIO PLAYBACK, PRESS MODE BUTTON REPEATEDLY TO CHOOSE DIFFERENT PLAYBAC MODE AS BELOW: REPEAT ONCE > REPEAT ALBUM (MP3/WMA FORMAT ONLY) > REPEAT ALL > RANDOM > INTRODUCTION TRACKS PROGRAMMING UP TO 99 MP3 TRACKS & 20 CD AUDIO FORMAT TRACK CAN BE PROGRAMMED AND PLAYED IN ANY ORDER.
BLUETOOTH CONNECTION - THIS UNIT HAVE BLUETOOTH FUNCTION, WHICH CAN CONNECT AND PLAY MUSIC FROM YOUR BLUETOOH DEVICE (SUCH AS MOBILE PHONE). - PRESS FUNCTION BUTTON REPEATEDLY TILL DISPLAY SHOWS “BT”, THEN “BT” WILL BE FLASHING, IT MEANS THE UNIT IS READY FOR CONNECTION WITH YOUR BLUETOOH DEVICE. - SWITCH ON THE BLUETOOTH FUNCTION OF YOUR BLUETOOH DEVICE, AND SELECT “COMMANDER” BLUETOOTH EQUIPMENT FOR CONNECTION.
REMOTE CONTROL BATTERY INSTALLATION THE INFRA-RED TRANSMITTER REQUIRES 1 PC CR2025 LITHUM BATTERY FOR OPERATION BUTTON DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 STANDBY: TRIGGER BETWEEN STANDBY MODE AND OPERATION MODE. PRESET/ALBUM DN: PERFORM SAME FUNCTION AS “ALBUM DOWN / PRESET DOWN” BUTTON ON THE UNIT. PRESET/ALBUM UP: PERFORM SAME FUNCTION AS “ALBUM UP / PRESET UP” BUTTON ON THE UNIT. TIMER / SLEEP: PERFORM SAME FUNCTION AS “TIMER / SLEEP” BUTTON ON THE UNIT. MUTE: TO MUTE AUDIO PLAYBACK.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
