Instruction Manual

5
REPEATEDLY. PRESS MODE BUTTON AGAIN, IT WILL REPEATEDLY PLAY ALL TRACKS IN THE WHOLE
CD.
TRACKS PROGRAMMING
UP TO 99 MP3 TRACKS & 20 CD AUDIO FORMAT TRACK CAN BE PROGRAMMED AND PLAYED IN ANY
ORDER. BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:
1. PRESS CD/USB BUTTON REPEATEDLY TO CHOOSE “CD” AND SET AT STOP MODE
2.PRESS THE MODE BUTTON, “MEM” WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL INDICATE
PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3.SELECT A DESIRED TRACK BY PRESSING SKIP UP OR SKIP DOWN BUTTON. FOR
MP3/WMA DISC, TURNING ALBUM DOWN OR ALBUM UP KNOB TO SEARCH FOLDER BACKWARD OR
FORWARD.
4.PRESS THE MODE BUTTON TO STORE THE TRACK INTO MEMORY.
5.REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6.WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS PLAY/PAUSE BUTTON TO
PLAY THE TRACKS IN ASSIGNED ORDER.
7. PRESS STOP BUTTON TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS STOP BUTTON
AGAIN TO CANCEL PROGRAMMING.
BLUETOOTOOTH CONNECTION
- THIS UNIT HAVE BLUETOOTH FUNCTION, WHICH CAN CONNECT AND PLAY MUSIC FROM
YOUR BLUETOOH DEVICE (SUCH AS MOBILE PHONE).
- PRESS AND HOLD CD/USB BUTTON TILL DISPLAY SHOWS “BT”, THEN BT INDICATOR (BLUE
COLOR) WILL BE FLASHING, IT MEANS THE UNIT IS READY FOR CONNECTION WITH YOUR
BLUETOOH DEVICE.
- SWITCH ON THE BLUETOOTH FUNCTION OF YOUR BLUETOOH DEVICE, AND SELECT
“QT62BT” BLUETOOTH EQUIPMENT FOR CONNECTION.
- AFTER YOUR BLUETOOH DEVICE IS CONNECTED WITH THE UNIT, BT INDICATOR (BLUE
COLOR) WILL STAY ON, THEN START TO PLAYBACK YOUR DEVICE.
EARPHONE JACK
- THIS SYSTEM CAN BE CONNECTED WITH HEADPHONE OR EXTERNAL AMPLIFIER /
SPEAKER BY 3.5MM EARPHONE JACK.
POWER SAVING FEATURE:
TO SAVE ENERGY, IF THERE IS NO AUDIO SIGNAL FROM CD / AUX IN / USB FOR A PERIOD OF OVER 10
MINUTES, THEN THE UNIT WILL AUTOMATICALLY SWITCH TO STANDBY MODE.