Instruction Manual

3
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT EXTERNAL POWER ADAPTOR TO EXTERNAL POWER ADAPTOR JACK
2. PUSH THE STANDBY TO SWITCH ON THE UNIT. LCD WILL BE BRIGHT UP FROM DIMMER LIGHTING.
SETTING THE CLOCK
1 WHEN THE LCD DISPLAY IN DIMMER LIGHTNING, UNIT IS IN THE STANDBY MODE.
2 DURING STANDBY MODE, SELECT BETWEEN 12H OR 24H MODE: PRESS AND HOLD CLK BUTTON FOR
3-5 SECONDSS, 12H / 24H WILL BE FLASHING. PRESS SKIP UP OR SKIP DOWN BUTTON TO
SELECT 12H / 24H MODE. PRESS CLK BUTTON AGAIN TO CONFIRM.
3 SETTING HOUR: PRESS SKIP UP OR SKIP DOWN BUTTON TO SELECT THE CORRECT HOUR,
THEN PRESS CLK BUTTON AGAIN TO CONFIRM.
4 SETTING MINUTE: AFTER STEP 3 IS COMPLETED, PRESS SKIP UP OR SKIP DOWN BUTTON TO
SELECT THE CORRECT MINUTE, THEN PRESS CLK BUTTON AGAIN TO CONFIRM.
LISTENING TO RADIO
RADIO TUNING
1. PRESS AM/FM BUTTON TO ACTIVATE “TUNE” MODE. PRESS AM/FM BUTTON REPEATEDLY TO SWITCH
BETWEEN AM AND FM BAND.
2. TURN THE RADIO TUNING KNOB LEFT OR RIGHT TO SELECT THE DESIRED STATION.
3. RADIO FREQUENCY DIAL SCALE AND DIAL POINTER WILL SHOW THE RADIO FREQUENCY
HINTS FOR BETTER RECEPTION
1. AM: THERE IS A BUILT-IN AM BAR ANTENNA. IF AM RECECPTION IS WEAK, SLIGHTLY ROTATING OR
RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.
2. FM : PUT OUT THE TELESCOPIC ANTENNA TO ENHANCE RADIO RECEPTION IF NECSESSARY.
AUX IN MODE
PRESS AUX BUTTON TO ACTIVATE “AUX” ON DISPLAY, THEN CONNECT THE EXTERNAL AUDIO DEVICE
(SUCH AS CD PLAYER) THROUGH THE AUX IN JACK. AUDIO SIGNAL FROM THE EXTERNAL AUDIO DEVICE
CAN BE PLAYED THROUGH THE SYSTEM.
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 / WMA FILE WHICH STORED IN THE MEMORY
MEDIA WITH USB CONNECTING PORT.
1. PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT GOING INTO COMPLETELY. INSERT
STRAIGHT WITHOUT BENDING.
2. CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD DAMAGE THE AUDIO SYSTEM OR THE
STORAGE MEDIA (USB THUMB DRIVE). CHECK TO BE SURE THE DIRECTION IS CORRECT BEFORE
CONNECTION.
3. PRESS CD/USB BUTTON REPEATEDLY TO SELECT “USB” ON DISPLAY, THEN INSERT MEMORY DEVICE.
4. THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER FUNCTION
SELECTION, AND DISPLAY WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES (EG. 016). THEN THE
SYSTEM WILL START AUDIO PLAYBACK
 PLAY / PAUSE BUTTON
- PRESS THE “PLAY/PAUSE” BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO
CONTINUE.
 STOP BUTTON
- PRESS STOP BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW THE
TOTAL NUMBER OF MP3/WMA FILES. AND THEN USER CAN PRESS “SKIP UP” OR
“SKIP DOWN” BUTTON TO SELECT FILE FORWARD OR BACKWARD.
 SKIP UP
/ SKIP DOWN BUTTON
- DURING MP3/WMA PLAYBACK, PRESS SKIP UP BUTTON ONCE TO PLAY THE NEXT FILE.