Instruction Manual

5
ALARM MODE.
ii. SEQUENCE IS TUNE > CD > USB, PRESS ALARM BUTTON AGAIN TO CONFIRM.
5. SETTING ALARM VOLUME: “V - ” IS LIGHTING UP ON THE DISPLAY:
i. PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT THE
ALARM VOLUME, PRESS ALARM BUTTON AGAIN TO CONFIRM.
6.
SETTING ALARM IS COMPLETED, THE DISPLAY WILL SHOW THE SETTING AGAIN FOR USER’S
CHECKING
7. “CLOCK” ICON IS FLASHING WHEN ALARM IS IN ACTIVE. “CLOCK” ICON LIGHTS UP WHEN ALARM IS
SETTING IS STORED BUT NOT IN ACTIVE YET.
8. CANCEL ALARM: DURING STANDBY MODE, WHEN “CLOCK” ICON IS ON, PRESS ALARM, “CLOCK” ICON
WILL BE OFF.
SNOOZE FUNCTION
PRESS “SNOOZE” BUTTON ON THE REMOTE CONTROL WHEN ALARM IN ACTIVE, ALARM WILL BE SLIENT
FOR 10 MINUTES. AFTER 9-10 MINUTUE SNOOZE INTERVAL, ALARM WILL BE ACTIVE AGAIN. SNOOZE CAN
BE USED FOR REPEATEDLY WITHIN THE 1-HOUR ALARM ACTIVE INTERVAL.
TIMER FUNCTION
1. PUSH THE POWER KNOB TILL THE STANDBY INDICATOR (RED COLOR) LIGHT OFF. UNIT IS TURNING
FROM STANDBY MODE TO OPERATION MODE.
2. WHEN THE UNIT IS TURNED ON, PRESS SLEEP BUTTON REPEATEDLY TO CHOOSE THE SLEEP TIME
MINUTES FROM 90>80>70…..>10 OFF.
3. SLEEP TIME SETTING IS STORED WHEN THE “SLEEP” ICON LIGHTS UP ON THE DISPLAY.
4. WHEN THE SLEEP TIME MINUTES IS OVER, UNIT WILL BE SWITCHED TO STANDBY MODE
AUTOMATICALLY.
LISTENING TO FM RADIO
FM/AM RADIO TUNING
1. PRESS TUNER/BAND BUTTON (OR FUNCT BUTTON REPEATEDLY ON THE REMOTE CONTROL) TO
ACTIVATE TUNER MODE.
2. PRESS TUNER/BAND BUTTON AGAIN (OR
(STOP)/BAND ON THE REMOTE CONTROL) TO SWITCH
BETWEEN FM/AM BAND.
3. TUNE TO THE REQUIRED STATION BY PRESSING
SKIP UP BUTTON OR SKIP DOWN
BUTTON FOR 1-2 SECONDS, AND THEN RELEASE.
4. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP WHEN A RADIO STATION IS FOUND.
MANUAL PRESET FM/AM RADIO STATIONS
1. WHEN THE DESIRED RADIO STATION IS FOUND, PRESS MODE BUTTON TILL LCD SHOWS “P-01”.
2. TURN PRESET UP & DOWN KNOB TO SELECT THE PROGRAM NUMBER FOR STORING THE DESIRED
RADIO STATION.
3. PRESS MODE BUTTON AGAIN TO CONFIRM, PROGRAM NUMBER WILL STOP TO FLASH.
4. REPEAT STEP 2 & 3 UNTIL ALL DESIRED RADIO STATIONS IS BEING FOUND AND STORED
5. TURN PRESET UP & DOWN KNOB
TO CHOOSE THE PRESET RADIO STATIONS.
6. THE NUMBER OF STATIONS CAN BE FOUND AND STORED IS DEPENDED ON THE RECEPTION OF
DIFFERENT AREA AND COUNTRIES.
AUTO PRESET FM/AM RADIO STATIONS
1. DURING FM/AM RADIO MODE, PRESS THE PLAY/PAUSE BUTTON, THE UNIT WILL AUTOMATICLLY
SCAN THE RADIO FREQUENCY. WHEN THE CLEAR SIGNAL IS FOUND, IT WILL AUTOMATICALLY STORE
THE RADIO STATION, STARTING FROM PROGRAM NUMBER 1 (P-01).
2. WHEN AUTO SCANNING COMPLETED, UNIT WILL START TO PLAY FROM P-01.
3. TURN
PRESET UP & DOWN KNOB TO CHOOSE THE PRESET RADIO STATIONS.
4. THE NUMBER OF STATIONS CAN BE FOUND AND STORED IS DEPENDED ON THE RECEPTION OF
DIFFERENT AREA AND COUNTRIES.
FM & FM-STEREO RECEPTION
 PRESS FM ST. BUTTON (ON REMOTE CONTROL) TO SELTECT FM MONO OR FM STEREO MODE. WHEN
STEREO SIGNAL ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO.
 “ST” ICON LIGHT UP ON THE DISPLAY TO SHOW FM STEREO MODE IS RECEIVING.