OWNER’S MANUAL WALL CABINET
PARTS LIST Your Wall Cabinet should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact us. You will need a Phillips screwdriver for assembly which is not provided.
ASSEMBLY INSTRUCTIONS STEP 1 Position WALL BRACKET (D) on wall at desired height, making sure it is level. D (1) Mark off mounting location on wall through oval holes on WALL BRACKET (D). If ANCHORS (G) are required, drill holes in marked locations. Insert ANCHOR (G) completely into each drilled hole. F (4) G (4) G Fasten LONG SCREWS (F) through oval holes on WALL BRACKET (D) into wall or anchors tightly with a Phillips screwdriver.
ASSEMBLY INSTRUCTIONS STEP 3 Open cabinet door by lifting up door handle. Attach SHELF SUPPORT (C) by hooking it over position tab at desired height. Make sure all four SHELF SUPPORTS (C) are at same level. door handle B (1) door A Tilt SHELF (B) diagonally to move it inside cabinet. Place SHELF (B) on top of all four SHELF SUPPORTS (C).
USAGE INSTRUCTIONS OPEN AND CLOSE DOOR Open door by lifting up door handle. Close door by pushing down door handle until it fit inside slot on bottom edge of cabinet body. The door will not stay closed if the handle is not in the slot. Slot on bottom edge of cabinet body Door Handle SHELF ADJUSTMENT Ensure all items have been removed from shelf. To adjust shelf height position, take shelf out of cabinet, re-attach shelf supports to position tabs at desired height.
SERVICE PARTS LIST Customer Service provides the following replacement parts: Description Description 1) Cabinet Body 7) Shelf Support 2) Door 8) Handle Screw 3) Door Hinge 9) Handle Base Plate Screw 4) Gas Lift 10) Handle Base Plate 5) Shelf 11) Handle 6) Wall Mount Hardware Kit 11 1 10 2 9 3 8 4 7 5 6 (x3) (x4) (x4) 6
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
1 YEAR LIMITED WARRANTY Wall Cabinet We warrant to the original consumer purchaser (“Purchaser”) of the Wall Cabinet (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase. Our obligation under this warranty shall be limited to repair or replacement of, or adequate compensation for the Product which shall not be greater than the amount of the purchase price of the Product, at our option, during the warranty period.
