Installation & Assembly

3
M (4)
STEP 4
Stand the unit right side up.
Position TOP BEAM (B) on top front of the
cabinet. Make sure the lip of TOP BEAM (B)
is inside the tabs. Align the holes on tabs to
pre-installed nuts on lip of TOP BEAM (B).
Insert BLACK SCREWS (M) through these
holes. Tighten them fully with a Phillips
screwdriver.
ASSEMBLY INSTRUCTIONS
STEP 3
B (1)
Screw FEET LEVELER (K) all the way in each
pre-installed nut in four corners of the
BOTTOM PANEL(C).
K (4)
tab
lip
C
K
B
M