Installation & Assembly

ASSEMBLY INSTRUCTIONS
4
Align Wood Top edges to Base Cabinets top edges. Place
WOOD TOP BRACKET (A) on back corner of each cabinet.
Align bottom hole on WOOD TOP BRACKET (A) to each
pre-installed nut on back corner of cabinet. Insert
CABINET SCREW (C) into each bottom hole and tighten
them fully to cabinet with a Philips screwdriver.
Insert WOOD SCREW (B) into each top hole and tighten
them fully to wood top edge with a Philips screwdriver.
With 2 people, carefully slide entire assembly into final
location. Do NOT lift assembly by Wood Top.
A
B
C
Bottom Hole
Top Hole
Pre-installed nut on back
corner of base cabinet
Wood Top
Back Edge
Back of cabinets
A (4) B (8) C (4)
Step 2