OWNER’S MANUAL OWNER’S MANUAL TRINITY 100 QT DETACHABLE STAINLESS STEEL COOLER W/ SHELF Model # TXK-0805 Important / Important / Importante FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES Direct ives int elligent es Inst rucciones Int eligent es PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE | DESCARGUE LA APLICACIÓN GRATUITA
PARTS LIST Your TRINITY Stainless Steel Cooler should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online via “Contact Us” section at www.trinityii.com. You will need a Phillips screwdriver for assembly which is not provided.
ASSEMBLY INSTRUCTIONS STEP 1 Place FRAMES (D) upside down with black circular receivers on the floor and approximately SHELF (C) width apart. L Align holes in SHELF (C) with bottom of FRAME (D), making sure SHELF Lip is facing downwards. C (1) L (2) K (2) D (2) M M (1) K Screw LOCKING CASTERS (K) into bottom of FRAMES (D), securing SHELF (C) in-between. Please make sure LOCKING CASTERS (K) are installed on same side.
ASSEMBLY INSTRUCTIONS STEP 3 Attach CAP CATCHER (H) to TUB (A) by sliding it downward, over metal notch. Attach BOTTLE OPENER (I) to TUB (A) using SMALL SCREWS (E). H (1) I (1) E (2) Phillips E I H STEP 4 Unscrew DRAIN PLUG (J) assembly. Insert DRAIN PLUG (J) through the opening in TUB (A) from inside. Make sure rubber seal is on the inside of TUB (A). J (1) From outside, slide washer on first, then the second washer with chain attached, and then screw on nut. Be sure not to overtighten.
ASSEMBLY INSTRUCTIONS STEP 5 Carefully turn Cart right-side up. Set TUB (A) on top of Cart. Make sure tub feet sit securely inside receivers on top of FRAME (D). STEP 6 Set LID (B) on top of TUB (A). B B (1) Clean the inside of the Cooler thoroughly before use. © 2020 TRINITY - 800.985.
SERVICE PARTS LIST – TXK-0805 TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) PBR-17-002-3317 Cooler Lid 10) ZSV-99-011-3010 Non-Locking Caster 2) AMA-05-005-0150 Lid Knob 11) XXX-97-002-0007 Wrench 3) XSV-01-010-0530 Knob Screw 12) PBR-03-028-3116 Shelf 4) XST-18-015-3317 Cooler Tub 13) PBR-14-015-1717 Frame 5) XST-02-004-0001 Bottle Opener 14) XSV-01-033-0415 Receiver Screw 6) XST-02-005-0002 Cap Catc
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Use the provided caster wrench to tighten completely.
CARE AND MAINTENANCE • Remember to drain remaining water and remove un-melted ice after use. Wipe dry for storage. • Avoid harsh, abrasive cleaners, and other corrosive chemicals. • Do not use scouring pad for cleaning. • Keep dry and avoid damp environments. • Use a quality stainless steel cleaner and follow instructions that come with the cleaner. Wipe ALONG the grain (NOT against). • Cooler should not be left out unprotected in the elements.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY Stainless Steel Cooler. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
9 © 2020 TRINITY - 800.985.
1 YEAR LIMITED WARRANTY TRINITY Stainless Steel Cooler Model # TXK-0805 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY Stainless Steel Cooler (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.
