OWNER’S MANUAL OWNER’S MANUAL TRINITY 80 QT STAINLESS STEEL COOLER W/ SHELF Model # TXK-0802 Important / Important / Importante FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES Direct ives int elligent es Inst rucciones Int eligent es PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE | DESCARGUE LA APLICACIÓN GRATUITA
PARTS LIST Your TRINITY Stainless Steel Cooler should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online via “Contact Us” section at www.trinityii.com. You will need a Phillips screwdriver for assembly which is not provided.
ASSEMBLY INSTRUCTIONS STEP 1 Align HANDLES (F) on each side of TUB (A). Attach HANDLE (F) with LARGE SCREW (G). Make sure to tighten securely. HANDLES (F) can be attached either angled up or down based on your preference. A (1) F (2) G (12) Phillips F G A STEP 2 Turn Cooler upside down. Align LEG (D) with holes on bottom of TUB (A). Attach LEG (D) with SMALL SCREWS (E). Make sure to tighten securely. D (4) E (8) Phillips D E © 2020 TRINITY - 800.985.
ASSEMBLY INSTRUCTIONS STEP 3 Align holes in SHELF (C) with bottom of LEG (D), making sure that Shelf Lip is facing TUB (A). Screw LOCKING CASTER (K) into bottom of LEG (D), securing SHELF (C) in between. Make sure LOCKING CASTERS (K) are installed on the same side. Screw NON-LOCKING CASTER (L) into bottom of LEG (D), securing SHELF (C) in between. Repeat for the other NON-LOCKING CASTER (L). L K (2) C (1) L (2) M M (1) K Tighten CASTERS (K, L) with the provided WRENCH (M).
ASSEMBLY INSTRUCTIONS STEP 5 Unscrew DRAIN PLUG (J) assembly. Insert DRAIN PLUG (J) through the opening in TUB (A) from the inside. Make sure the rubber seal is on the inside of TUB (A). From the outside, slide the Washer on first, then the second Washer with Chain, and then screw on the Nut. Be sure not to overtighten. Once DRAIN PLUG (J) is in place, screw on the Cap. J (1) Outside the tub Inside the tub J STEP 6 Set LID (B) on top of TUB (A). Clean the inside of Cooler thoroughly before use.
SERVICE PARTS LIST – TXK-0802 TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) PBR-17-002-3115 Cooler Lid 9) ZSV-99-011-3010 Non-Locking Caster 2) AMA-05-005-0150 Lid Knob 10) PBR-03-028-2913 Shelf 3) XSV-01-010-0530 Knob Screw 11) PBR-04-022-1625 Leg 4) XST-18-015-3115 Cooler Tub 12) XSV-01-010-0416 Small Screw 5) XST-02-004-0001 Bottle Opener 13) CGL-02-003-0001 Drain Plug 6) XST-02-005-0002 Cap Catche
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Use the provided caster wrench to tighten completely.
CARE AND MAINTENANCE • Remember to drain remaining water and remove un-melted ice after use. Wipe dry for storage. • Avoid harsh, abrasive cleaners, and other corrosive chemicals. • Do not use scouring pad for cleaning. • Keep dry and avoid damp environments. • Use a quality stainless steel cleaner and follow instructions that come with the cleaner. Wipe ALONG the grain (NOT against). • Cooler should not be left out unprotected in the elements.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY Stainless Steel Cooler. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
9 © 2020 TRINITY - 800.985.
1 YEAR LIMITED WARRANTY TRINITY Stainless Steel Cooler Model # TXK-0802 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY Stainless Steel Cooler (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.
