Locker cabinet installation and assembly

USAGE INSTRUCTIONS
Ensure all items have been removed
from shelf.
To adjust shelf height position, take shelf
out of cabinet, re-attach shelf supports
to position tabs at desired height.
Tilt shelf diagonally to move it inside
cabinet. Place shelf on top of all shelf
supports.
© 2018 TRINITY - 800.985.5506
4
Shelf support attach to position tab
OPEN AND CLOSE DOOR
SHELF ADJUSTMENT
Lift up door handle to release it from
slot on handle base plate, rotate it
forward and pull it to open door.
Close door by making sure ends of
door bar is pushed against the stopper
plate both on top and bottom. Rotate
the door handle against door and slide
into the slot on door handle base plate
to keep door closed.
Note: To lock the door you need to
buy a padlock with shackle diameter
no larger than 9/32” (7mm). Put the
shackle through the holes on door
handle and handle base plate to lock
the door.
Handle Base Plate
Door Handle
Slot on Handle Base Plate
Hole on Handle
Base Plate
Stopper Plate