Base cabinet installation and assembly

USAGE INSTRUCTIONS
OPEN AND CLOSE DOOR
SHELF ADJUSTMENT
Ensure all items have been removed
from shelf.
To adjust shelf height position, take
shelf out of cabinet and re-attach shelf
supports to position tabs at desired
height.
Tilt shelf diagonally to move it inside
cabinet. Place shelf on top of all shelf
supports.
© 2018 TRINITY - 800.985.5506
4
Shelf support attach to position tab
Lift up door handle to release it from
slot on handle base plate, rotate it
forward and pull it to open door.
Close door by making sure ends of door
bar is pushed against the stopper plate
both on top and bottom. Rotate the
door handle against door and slide into
the slot on door handle base plate to
keep door closed.
Note: To lock the door you need to buy
a padlock with shackle diameter no
larger than 9/32” (7mm). Put the
shackle through the holes on door
handle and handle base plate to lock the
door.
Door Handle
Handle Base Plate
Slot on Handle Base Plate
Hole on Handle
Base Plate
Stopper Plate