Wall cabinet installation and assembly

ASSEMBLY INSTRUCTIONS
© 2018 TRINITY - 800.985.5506
4
Option 2 (Installed on 1 Base Cabinet)
A
B
C
TRINITY PRO logo on front side of cabinet
Wood Top
Base Cabinet
Bottom Hole
Top Hole
Wood Top Back Edge
Pre-installed nut on back
corner of base cabinet
Base
Cabinet (1)
A (2)
Wood
Top (1)
B (4)
C (2)
Move TRINITY PRO Base Cabinet close to final
location where it will be placed. With 2 people,
position a TRINITY PRO 56”x 19” WOOD TOP on top
of an assembled base cabinet as shown. Make sure
logo on wood top edge is upright and front facing
on cabinet.
Place WOOD TOP BRACKET (A) on back corner of
cabinet. Align bottom hole on WOOD TOP BRACKET
(A) to each pre-installed nut on back corner of
cabinet. Insert CABINET SCREW (C) into each
bottom hole and tighten them fully to cabinet with
a Philips screwdriver.
Insert WOOD SCREW (B) into each top hole and
tighten them fully to wood top edge with a Philips
screwdriver.
Note: 4-piece Set does not include Wall Mounting
Hardware. If you desire set up in this configuration
you will need to buy a Wall Mounting Hardware Kit
(PBK-02-011-0014) which is available for purchase
through our website or our customer service
number.