Wall cabinet installation and assembly

ASSEMBLY INSTRUCTIONS
© 2018 TRINITY - 800.985.5506
3
Option 1 (Installed on 2 Base Cabinets)
A
Base
Cabinet (2)
A (4)
Stand two assembled TRINITY PRO Base Cabinets
side by side and close to final location of where
cabinets will be placed.
Position a TRINITY PRO 56”x 19” WOOD TOP on
top of aligned base cabinets. Make sure logo on
Wood Top edge is upright and front facing on
cabinets.
Align Wood Top edges to Base Cabinets top
edges. Place WOOD TOP BRACKET (A) on back
corner of each cabinet. Align bottom hole on
WOOD TOP BRACKET (A) to each pre-installed
nut on back corner of cabinet. Insert CABINET
SCREW (C) into each bottom hole and tighten
them fully to cabinet with a Philips screwdriver.
Insert WOOD SCREW (B) into each top hole and
tighten them fully to Wood Top edge with a
Philips screwdriver.
With 2 people, carefully slide entire assembly
into final location. Do NOT lift assembly by
Wood Top.
Wood
Top (1)
B (8) C (4)
B
C
Pre-installed nut on back
corner of base cabinet
Wood Top
Back Edge
Bottom Hole
Top Hole
TRINITY PRO LOGO on front side of cabinet
Base Cabinets
Wood Top
Back of cabinets