OWNER’S MANUAL TRINITY PRO 56” x 19” WOOD TOP Model # TLSLNA-4898
1 © 2018 TRINITY - 800.985.
PARTS LIST Your TRINITY PRO 56“ x 19“ Wood Top can be mounted on top of the TRINITY PRO Base Cabinet. To install it requires one of the following parts kit for assembly which are included in TRINITY PRO Base Cabinet hardware package. Please inspect box contents to ensure you have received all components. You will also need a Phillips screwdriver for assembly which is not provided. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.
ASSEMBLY INSTRUCTIONS Option 1 (Installed on 2 Base Cabinets) Stand two assembled TRINITY PRO Base Cabinets side by side and close to final location of where cabinets will be placed. Position a TRINITY PRO 56”x 19” WOOD TOP on top of aligned base cabinets. Make sure logo on Wood Top edge is upright and front facing on cabinets. Base Cabinet (2) Wood Top (1) A (4) B (8) C (4) TRINITY PRO LOGO on front side of cabinet Wood Top Align Wood Top edges to Base Cabinets top edges.
ASSEMBLY INSTRUCTIONS Option 2 (Installed on 1 Base Cabinet) Move TRINITY PRO Base Cabinet close to final location where it will be placed. With 2 people, position a TRINITY PRO 56”x 19” WOOD TOP on top of an assembled base cabinet as shown. Make sure logo on wood top edge is upright and front facing on cabinet. Base Cabinet (1) Wood Top (1) B (4) A (2) C (2) TRINITY PRO logo on front side of cabinet Wood Top Place WOOD TOP BRACKET (A) on back corner of cabinet.
ASSEMBLY INSTRUCTIONS Option 2 (Installed on 1 Base Cabinet) Place two WALL BRACKETS (D) to other end of back edge of Wood Top as shown. Make sure one bracket is as close as possible to end of unsupported end of wood top. Insert WOOD SCREW (B) into each top hole and tighten them fully to wood top edge with a Philips screwdriver. B (4) D (2) E (4) F (4) With 2 people, carefully slide assembled unit to wall at desired location. Do NOT lift assembly by wood top.
SERVICE PARTS LIST TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) XSV-01-036-0425 Wall Screw 4) XSV-01-027-0408 Cabinet Screw 2) XGR-01-032-0525 Wall Anchor 5) PBK-19-009-0300 Wood Top Bracket 3) XSV-01-036-0416 Wood Screw 6) PBK-19-010-0300 Wall Bracket 6 1 2 5 3 4 © 2018 TRINITY - 800.985.
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY PRO 56” x 19” Wood Top. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
9 © 2018 TRINITY - 800.985.
1 YEAR LIMITED WARRANTY TRINITY PRO 56” x 19” Wood Top Model # TLSLNA-4898 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY PRO 56” x 19” Wood Top (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.
OWNER’S MANUAL TRINITY PRO 28” BASE CABINET W/ DOORS Model # TSNPBK-0608
1 © 2018 TRINITY - 800.985.
PARTS LIST Your TRINITY PRO 28“ Base Cabinet w/Doors should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online at www.trinityii.com (Help & More, Contact Us). No tools required for assembly. A B CABINET BODY (1) © 2018 TRINITY - 800.985.
ASSEMBLY INSTRUCTIONS STEP 1 Lay CABINET BODY (A) gently on its back. Two people are needed, Do NOT attempt this alone. A A (1) D (4) Screw FEET LEVELER (D) fully into each pre-installed nut on four corners of cabinet bottom. Stand cabinet right side up. Move it to desired location. Adjust FEET LEVELER (D) as needed to ensure your cabinet is level and stable. D STEP 2 Attach SHELF SUPPORT (C) by hooking it over position tab at desired height. Make sure all four SHELF SUPPORTS (C) are at the same level.
USAGE INSTRUCTIONS OPEN AND CLOSE DOOR Stopper Plate Lift up door handle to release it from slot on handle base plate, rotate it forward and pull it to open door. Close door by making sure ends of door bar is pushed against the stopper plate both on top and bottom. Rotate the door handle against door and slide into the slot on door handle base plate to keep door closed. Note: To lock the door you need to buy a padlock with shackle diameter no larger than 9/32” (7mm).
SERVICE PARTS LIST – TSNPBK-0608 TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) PBK-18-020-2819 Cabinet Body 9) XSV-02-017-0001 Shelf Support 2) XSV-09-009-0003 Door Hinge 10) XSV-01-010-0616 Handle Screw 3) XBS-02-030-0002 Right Handle Base Plate 11) XBS-02-030-0001 Left Handle Base Plate 4) XBS-05-025-0720 Handle 12) XSV-01-010-0408 Door Bar Bracket Screw 5) XBS-05-026-2875 Door Bar 13) XBK-02-028-0001
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
7 © 2018 TRINITY - 800.985.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY PRO 28” Base Cabinet w/Doors. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
9 © 2018 TRINITY - 800.985.
1 YEAR LIMITED WARRANTY TRINITY PRO 28” Base Cabinet w/Doors Model # TSNPBK-0608 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY PRO 28” Base Cabinet w/Doors (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.
OWNER’S MANUAL TRINITY PRO 28” WALL CABINET Model # TSNPBK-0609
1 © 2018 TRINITY - 800.985.
PARTS LIST Your TRINITY PRO 28” Wall Cabinet should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online at www.trinityii.com (Help & More, Contact Us). You will need a Phillips screwdriver for assembly which is not provided.
ASSEMBLY INSTRUCTIONS STEP 1 Position WALL BRACKET (D) on wall at desired height, making sure it is level. D (1) Mark off mounting location on wall through oval holes on WALL BRACKET (D). If ANCHORS (G) are required, drill holes in marked locations. Insert ANCHOR (G) completely into each drilled hole. F (4) G (4) G Fasten LONG SCREWS (F) through oval holes on WALL BRACKET (D) into wall or anchors tightly with a Phillips screwdriver.
ASSEMBLY INSTRUCTIONS STEP 3 Open cabinet door by lifting up door handle. Attach SHELF SUPPORT (C) by hooking it over position tab at desired height. Make sure all four SHELF SUPPORTS (C) are at same level. door handle B (1) door C (4) A Tilt SHELF (B) diagonally to move it inside cabinet. Place SHELF (B) on top of all four SHELF SUPPORTS (C). B C © 2018 TRINITY - 800.985.
USAGE INSTRUCTIONS OPEN AND CLOSE DOOR Open door by lifting up door handle. Close door by pushing down door handle until it fit inside slot on bottom edge of cabinet body. The door will not stay closed if the handle is not in the slot. Slot on bottom edge of cabinet body Door Handle SHELF ADJUSTMENT Ensure all items have been removed from shelf. To adjust shelf height position, take shelf out of cabinet, re-attach shelf supports to position tabs at desired height.
SERVICE PARTS LIST – TSNPBK-0609 TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) PBK-18-020-2814 Cabinet Body 7) XSV-02-017-0001 Shelf Support 2) PBK-08-013-2616 Door 8) XSV-01-027-0416 Handle Screw 3) XSV-09-009-0002 Door Hinge 9) XSV-01-027-0408 Handle Base Plate Screw 4) ZBK-09-014-0001 Gas Lift 10) XBS-02-030-0003 Handle Base Plate 5) PBK-03-073-1227 Shelf 11) XBS-05-025-0700 Handle 6) PBK-02-011-001
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY PRO 28” Wall Cabinet. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
9 © 2018 TRINITY - 800.985.
1 YEAR LIMITED WARRANTY TRINITY PRO 28” Wall Cabinet Model # TSNPBK-0609 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY PRO 28” Wall Cabinet (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.
OWNER’S MANUAL TRINITY PRO 36” LOCKER CABINET Model # TSNPBK-0610
1 © 2018 TRINITY - 800.985.
PARTS LIST Your TRINITY PRO 36“ Locker Cabinet should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online at www.trinityii.com (Help & More, Contact Us). No tools required for assembly. A B CABINET BODY (1) © 2018 TRINITY - 800.985.
ASSEMBLY INSTRUCTIONS STEP 1 Lay CABINET BODY (A) gently on its back. Two people are needed, do NOT attempt this alone. Screw FEET LEVELER (D) fully into each pre-installed nut on four corners of cabinet bottom. A (1) D (4) A D Stand cabinet right side up. Move it to desired location. Adjust FEET LEVELER (D) as needed to ensure your cabinet is level and stable. STEP 2 Attach SHELF SUPPORT (C) by hooking it over position tab at desired height. Make sure all four SHELF SUPPORTS (C) are at same level.
USAGE INSTRUCTIONS OPEN AND CLOSE DOOR Stopper Plate Lift up door handle to release it from slot on handle base plate, rotate it forward and pull it to open door. Close door by making sure ends of door bar is pushed against the stopper plate both on top and bottom. Rotate the door handle against door and slide into the slot on door handle base plate to keep door closed. Note: To lock the door you need to buy a padlock with shackle diameter no larger than 9/32” (7mm).
SERVICE PARTS LIST – TSNPBK-0610 TRINITY Customer Service provides the following replacement parts: 15 14 Part Number Description Part Number Description 1) PBK-18-020-3624 Cabinet Body 9) XSV-02-017-0001 Shelf Support 2) XSV-09-009-0004 Door Hinge 10) XSV-01-010-0616 Handle Screw 3) XBS-02-030-0002 Right Handle Base Plate 11) XBS-02-030-0001 Left Handle Base Plate 4) XBS-05-025-0720 Handle 12) XSV-01-010-0408 Door Bar Bracket Screw 5) XBS-02-029-0001 Door Bar Bracket 13)
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
7 © 2018 TRINITY - 800.985.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY PRO 36” Locker Cabinet. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
9 © 2018 TRINITY - 800.985.
1 YEAR LIMITED WARRANTY TRINITY PRO 36” Locker Cabinet Model # TSNPBK-0610 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY PRO 36” Locker Cabinet (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.
