Warranty

USAGE INSTRUCTIONS

DRAWER REMOVAL

DRAWER REPLACEMENT

Pull the drawer out so that it is almost fully extended. On the RIGHT side, push the black release lever

DOWN. On the LEFT side, pull the black release lever UP. While holding the levers as instructed, pull

the drawer forward until released from the slides attached to the Workbench (“Workbench Slides”).

Note: The slides attached to the drawer (“Drawer Slides”) are an integral part of the drawer and must

be removed along with the drawer itself.

To replace the drawer, pull the slides out completely. Insert the brackets on each side of the Drawer

Slides into the corresponding slots on the Workbench Slides, making sure they are properly positioned.

Once the brackets are inserted into the slots, completely close the drawer to set all slides in their

proper positions.