Warranty

USAGE INSTRUCTIONS
SET NEW COMBINATION
© 2017 TRINITY - 800.985.5506
4
1. Slowly turn the Knob
to the Unlocked
Position (green dot),
leaving the Dials at the
preset
combination 0-0-0-0.
(Fig. A)
2. Slowly turn the Knob
clockwise 90 degrees to
the Reset Position
(white triangle).
(Fig. B)
3. Set your own
desired 4-digit
combination.
(Fig. C)
4. Slowly turn the Knob
counter-clockwise 90
degrees back to the
Unlocked Position (green
dot). Your combination
lock is now set with the
new combination.
(Fig. D)
FORGOT YOUR COMBINATION
1. The KEY (I) may be used at
any time to unlock the
workbench.
Insert and turn the KEY (I)
clockwise 90 degrees to the
Unlocked Position (green
dot).
(Fig. E)
2. Gently rotate each Dial until
it stops or until you hear a
discernible “click”.
(Fig. F)
Note:
Hold the KEY (I) firmly while you
turn Dials to retrieve your 4-digit
combination
3. Turn the Master Key counter-
clockwise 90 degrees to the Locked
Position (red dot) (Fig. G), then
remove the key.
You can now keep using the
retrieved 4-digit combination or
reset the combination by following
the instructions above.
Fig. A Fig. B Fig. C Fig. D
Fig. E Fig. F Fig. G
NOTE: Always keep your combination a secret and the key in a safe and accessible
place other than the workbench.