Warranty

ASSEMBLY INSTRUCTIONS

Position SIDE HANDLE (B) over pre-installed nuts

on the side of WORKBENCH (A). Insert HANDLE

BOLTS (C) through the WASHERS (D) first, then

the holes on SIDE HANDLE (B). Use a 10mm

wrench to tighten HANDLE BOLTS (C) to

WORKBENCH (A).

Repeat these instructions to install the other SIDE

HANDLE (B).

STEP 1

STEP 2

10mm

E (2) F (2)

G (16)

A (1) B (2)

C (8)

Carefully lay WORKBENCH (A) on its backside.

Position LOCKING CASTERS (E) on the same side of the

WORKBENCH (A) and align holes to pre-installed nuts

on the underside of WORKBENCH (A). Use a 14mm

socket wrench to tighten CASTER BOLTS (G) to

WORKBENCH (A).

Repeat above step to install the NON-LOCKING CASTERS

(F) on the other side of the WORKBENCH (A).

Notes:

* For ease of use, place LOCKING CASTERS (E) on the

side you will regularly push or pull.

** If you plan to push the Workbench against a wall,

place LOCKING CASTERS (E) on the front long side for

ease of access.

14mm

D (8)