Installation & Assembly

4
© 2018 TRINITY - 800.985.5506
STEP 6
Note: RIGHT DOOR (E) has a lock on it.
Attach LEFT DOOR (D) and RIGHT DOOR (E) one at
a time to the cabinet front by inserting the pivot
of door hinge which is welded on the BOTTOM
PANEL(C) into the bottom door cylinder.
Position LEFT DOOR HINGE (F) to the left side of
TOP BEAM (B) and RIGHT DOOR HINGE (G) to the
right side of TOP BEAM(B). Make sure to insert
the pivots of DOOR HINGES (F+G) into the top
door cylinders. Align holes on DOOR HINGES
(F+G) to pre-installed nuts on two sides of TOP
BEAM (B). Insert BLACK SCREWS (M) through
these holes. Tighten them fully with a Phillips
screwdriver.
G (1)
ASSEMBLY INSTRUCTIONS
STEP 5
J (1)
D (1)
Lay WOOD TOP (J) gently on a clean surface.
Make sure the side with a rectangular groove
faces up.
Turn the cabinet upside down and put it on
the WOOD TOP (J). Make sure the TOP BEAM
(B) sit inside the groove. Align holes on TOP
BEAM (B) and the top frame of cabinet to
pre-installed nuts on wood top. Follow the
order indicated, insert SILVER SCREWS (N)
through these holes and tighten them fully
with a Phillips screwdriver.
M (4)
F (1)
N (13)
E (1)
pivot
cylinder
1
1
2
3
M
F
G
B
E
D
N
B
J