Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Position SIDE HANDLE (B) over pre-installed nuts on side of

WORKBENCH (A). Insert HANDLE BOLTS (C) through holes on

SIDE HANDLE (B). Use a 10mm socket wrench to fully tighten

HANDLE BOLTS (C) to WORKBENCH (A).

Repeat above steps to install remaining SIDE HANDLE (B).

STEP 1

STEP 2

10mmA (1) B (2) C (12)

Location of parts:

1) KEYS (H) are in a plastic bag taped on top of

the CASTERS (D/E/F) box in BOTTOM LEFT

Drawer.

2) LINERS (G) / SIDE HANDLES (B) and HANDLE

BOLTS (C) are all in BOTTOM RIGHT Drawer.