OWNER’S MANUAL TRINITY BASICS STAINLESS STEEL WORKBENCH W/ PEGBOARD Model # TLS-4820 Important / Important / Importante FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES Direct ives int elligent es Inst rucciones Int eligent es PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE | DESCARGUE LA APLICACIÓN GRATUITA
PARTS LIST Your TRINITY Basics Stainless Steel Workbench w/ Pegboard should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online at www.trinityii.com (Help & More, Contact Us). You will need 14mm wrench (for casters) and 12mm wrench (for pegboard) for assembly.
ASSEMBLY INSTRUCTIONS STEP 1 1 2 Location of parts: 3 1) KEYS (H) are hooked to key leash mounted inside Drawer. 4 2) LINERS (G) are inside Drawer. 3) CASTERS (B/C) / CASTER BOLTS (D) / SHELF SUPPORTS (F) and HOOKS (I) are boxed inside Cabinet. 4) SHELF (E) is inside bottom Cabinet. STEP 2 With two people, carefully lay WORKBENCH (A) on its backside. Do NOT attempt this alone.
ASSEMBLY INSTRUCTIONS STEP 3 Carefully lift Workbench upright. Two people are needed. Do NOT attempt this alone. 12mm Unscrew bottom Bolt on left and right side of Pegboard with a 12mm socket wrench. Lift Pegboard upright. With one person holding Pegboard in place, have second person insert bottom Bolt into top hole of each bracket. Securely tighten both Bolts back with socket wrench. BOTTOM BOLT PEGBOARD TOP HOLE BOTTOM BOLT BRACKET 3 © 2020 TRINITY - 800.985.
ASSEMBLY INSTRUCTIONS STEP 4 SHELF (E) is shipped inside the bottom cabinet. Tilt SHELF (E) diagonally and remove it from cabinet. E (1) F (4) Position Tab Attach SHELF SUPPORT (F) by hooking it over position tab at desired height. Make sure all four SHELF SUPPORTS (F) are at same level. Tilt SHELF (E) diagonally to move it inside cabinet. Place SHELF (E) on top of all four SHELF SUPPORTS (F). You can adjust shelf height position by removing shelf, re-locating shelf supports and replacing shelf.
ASSEMBLY INSTRUCTIONS STEP 6 Hang HOOKS (I) into holes on pegboard at your desired location. I (10) 5 © 2020 TRINITY - 800.985.
USAGE INSTRUCTIONS DRAWER REMOVAL Pull drawer out so that it is almost fully extended. On RIGHT-hand side, push black release lever DOWN. On LEFT-hand side, pull black release lever UP. While holding levers as instructed, pull drawer forward until released from slides attached to Workbench (“Workbench Slides”). Note: Slides attached to drawer (“Drawer Slides”) are an integral part of drawer and must be removed along with drawer itself. DRAWER REPLACEMENT To replace drawer, pull slides out completely.
SERVICE PARTS LIST – TLS-4820 TRINITY Customer Service provides the following replacement parts: 7 Part Number Description Part Number Description 1) XBK-02-047-0001 Key leash 13) XBK-22-007-2717 Shelf Liner 2) XBK-10-001-0XXX Key 14) ZSV-99-004-5020 Locking Caster 3) XBS-07-013-2716 Drawer 15) XBS-08-015-2114 Left Door 4) LNA-06-015-3119 Wood Top 16) AMA-05-007-2000 Door Handle 5) ZSV-12-010-1575 Slide (workbench side) 17) XBK-23-010-3012 End cap 6) AMA-05-007-2600 Dra
SERVICE PARTS LIST – TLS-4820 TRINITY Customer Service provides the following replacement parts: NOTE: Replacement keys may be ordered using the code shown on the face of the lock. 1 24 23 2 22 3 21 4 20 5 19 6 18 7 17 8 16 9 15 10 14 11 13 12 © 2020 TRINITY - 800.985.
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
WARNINGS 13. Load the workbench starting with the bottom of cabinet to prevent workbench from tipping. 14. Make sure the drawer and/or doors are closed tightly before locking or unlocking. CARE AND MAINTENANCE • Avoid harsh, abrasive cleaners, and other corrosive chemicals. • Do not use scouring pad for cleaning. • Keep dry and avoid damp environments. • Use a quality stainless steel cleaner and follow instructions that come with the cleaner. Wipe ALONG the grain (NOT against).
11 © 2020 TRINITY - 800.985.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY Basics Stainless Steel Workbench w/Pegboard. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
13 © 2020 TRINITY - 800.985.
1 YEAR LIMITED WARRANTY TRINITY Basics Stainless Steel Workbench w/Pegboard Model # TLS-4820 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY Basics Stainless Steel Workbench w/ Pegboard (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.
